Friday, 25 November 2011

DIY iPod Pouch!



Not so long ago, I got myself a new iPod. I needed something to keep it in, so I made this little pouch from some old teal fabric. Of course this is a super easy little project, which took me less than half an hour to complete. I think that the white piping along the edges makes it a little more special than your average drawstring bag! Ha



Here’s what you need:

- fabric of your choice for the bag itself
- fabric of your choice for the piping
- scissors
- thread
- a zipper presser foot for your sewing machine
- a sewing machine
- ribbon
- twine – I used hay bale twine as it’s nice to put something to use that is only going to be thrown out. Any old string should be fine.

First of all, begin by making your piping! You will need approximately 75cm of string and a long strip of your piping fabric – around 75cm by 3cm should do the trick. Place the string in the middle of the fabric, length ways, and fold the fabric over.



Using your zipper presser foot, sew down the fabric, as close to the string as possible.



Now cut out the fabric for the actual pouch. You will need two rectangles approximately 16cm by 11cm. Round off the bottom corners of each piece.

Place the two pieces of fabric together, with the right sides facing each other. Take your piping and insert it between the two pieces of fabric, along the edges of the bottom and two sides. Pin all three together. Now, still using your zipper foot, sew along the edges, as close to the piping as possible. It might be a little fiddly around the rounded edges. Turn it the right way out to check that the piping is sitting smoothly.

Cut out a strip of fabric around 20cm by 5cm. Turn your bag back inside out. Pin the strip around the top of the bag, with the beginning and ending of the strip at the front of the pouch. Pin the excess fabric back the other way and sew around the top.




Turn your bag the right way out, then flip the strip on top over so it’s on the outside. Fold the very bottom of the strip under and then poke your piping under too. Sew all around the bottom. Thread your ribbon around the top, tie it in a bow, and you’re done!

Too cute.

No comments:

Post a Comment